Made available by
Touch N' Go Systems, Inc., and the
Law Offices of James B. Gottstein.
You can also go to The Alaska Legal Resource Center or search the entire website search.
|
To meet the requirements of 18 AAC 75.005 - 18 AAC 75.080, the owner or operator is encouraged to follow applicable recommended practices and operating guidelines, including the following:
(1) American Petroleum Institute (API) Chapter 6.6, Manual of Petroleum Measurement Standards, Metering Assemblies, Pipeline Metering Systems, First Edition, 1981, Reaffirmed August 1987 (ANSI/API MPMS 5.6-1981);
(2) API Publication 1615, Installation of Underground Petroleum Storage Systems, Fourth Edition, Cautionary Statement, March, 1989;
(3) API Publication 2008, Safe Operation of Inland Bulk Plants (1984);
(4) API Publication 2200-83, Repairing Crude Oil, Liquified Natural Gas, and Product Pipelines (1983);
(5) API Recommended Practice 2A, Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms ;
(6) API Recommended Practice 2A-LFRD, Draft Recommended Practice for Planning, Designing and Construction Fixed Offshore Platforms - Load and Resistance Factor Design, First Edition, December 15, 1989;
(7) API Recommended Practice 2K, Recommended Practice for Care and Use of Marine Drilling Risers, Second Edition, January 1982;
(8) API Recommended Practice 2Q, Recommended Practice for Design and Operation of Marine Drilling Riser Systems, Second Edition, April 1984;
(9) API Recommended Practice 2R, Recommended Practice for Design, Rating and Testing of Marine Drilling Riser Couplings, First Edition, May 1984;
(10) API Recommended Practice T-2, Recommended Practice for Qualification Programs for Offshore Production Personnel Who Work with Anti-Pollution Safety Devices, Revised Edition, October 1975;
(11) API Recommended Practice T-3, Recommended Practice for Training and Qualification of Personnel in Well Control Equipment and Techniques for Drilling on Offshore Locations, July 1976;
(12) API Recommended Practice T-6, Recommended Practice for Training and Qualification of Personnel in Well Control Equipment and Techniques for Completion and Workover Operations on Offshore Locations, First Edition, October 1986;
(13) API Recommended Practice 6G, Recommended Practice on Through Flowline (TFL) Pump Down Systems, Third Edition, January 1982;
(14) API Recommended Practice 12R1 (RP12R1), Recommended Practice for Setting, Maintenance, Inspection, Operation and Repair of Tanks in Production Service, Fourth Edition, 1991;
(15) API Recommended Practice 14B, Recommended Practice for Design, Installation, Repair and Operation of Subsurface Safety Valve Systems, Third Edition, January 1, 1990;
(16) API Recommended Practice 14C, Recommended Practice for Analysis, Design, Installation and Testing of Basic Surface Safety Systems on Offshore Production Platforms, Fourth Edition, September 1986, Errata November 1986;
(17) API Recommended Practice 14E, Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems, Fourth Edition, April 1984;
(18) API Recommended Practice 14G, Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms, Second Edition, 1986;
(19) API Recommended Practice 14H, Recommended Practice for Use of Surface Safety Valves and Underwater Safety Valves Offshore, Second Edition, April 1984 and Supplement 1 to the Second Edition for RP 14H, June 1986;
(20) API Recommended Practice 16E, Recommended Practice for Design of Control Systems for Drilling Well Control Equipment, First Edition, October 1, 1990;
(21) API Recommended Practice 17A-87, Recommended Practice for Design and Operation of Subsea Production Systems, First Edition, September 1, 1987;
(22) API Recommended Practice 53, Recommended Practices for Blowout Prevention Equipment Systems for Drilling Wells, Second Edition, May 1984;
(23) API Recommended Practice 521, Guide for Pressure-Relieving and Depressuring Systems, Second Edition, September 1982;
(24) API Recommended Practice 652, Lining of Aboveground Petroleum Storage Tank Bottoms, First Edition, 1991;
(25) API Recommended Practice 750-90, Management of Process Hazards, First Erratum, February 1990;
(26) API Recommended Practice 1102, Recommended Practice for Liquid Petroleum Pipelines Crossing Railroads and Highways, Fifth Edition, November 1981 and Errata;
(27) API Recommended Practice 1110, Recommended Practice for the Pressure Testing of Liquid Petroleum Pipelines, Second Edition, December 1981;
(28) API Recommended Practice 1111, Recommended Practice for Design, Construction, Operation and Maintenance of Offshore Hydrocarbon Pipelines, First Edition, 1976;
(29) API Recommended Practice 2003, Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents, Fourth Edition, March 1982;
(30) API Recommended Practice for Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems, Second Edition (1987) and Supplement 2, March 1989;
(31) API Specification 5L, Specification for Line Pipe, Thirty-Eighth Edition, May 1, 1990;
(32) API Specification 6A, Specification for Wellhead and Christmas Tree Equipment, Sixteenth Edition, October 1, 1989;
(33) API Specification 6D, Specification for Pipeline Valves (Gate, Plug, Ball, and Check Valves), Twentieth Edition, 1991;
(34) API Specification 10, Specification for Materials and Testing for Well Cements, Fifth Edition, 1990;
(35) API Specification 12B, Specification for Bolted Tanks for Storage of Production Liquids, Thirteenth Edition, 1990;
(36) API Specification 12D, Specification for Field Welded Tanks for Storage of Product Liquids, Ninth Edition, January 1982, Supplement 1, March 1983, Supplement 2, May 1985;
(37) API Specification 12F, Specification for Shop Welded Tanks for Storage of Production Liquids, Tenth Edition, June 1, 1989;
(38) API Specification 12P, Specification for Fiberglass Reinforced Tanks, First Edition, 1986;
(39) API Specification 14D, Specification for Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service, Seventh Edition, January 1988 and Supplement, August 1989;
(40) API Standard 510, Pressure Vessel Inspection Code: Maintenance, Inspection, Rating, Repair and Alteration, Sixth Edition, June 1989, Erratum September 1989;
(41) API Standard 526, Flanged Steel Safety Relief-Valves, Third Edition, February 1984;
(42) API Standard 620, Design and Construction of Large Welded, Low-Pressure Storage Tanks, Eighth Edition, June 1990;
(43) API Standard 650, Welded Steel Tanks for Oil Storage, Eighth Edition, November 1988, Revised 1990;
(44) API Standard 653, Tank Inspection, Repair, Alteration, and Reconstruction, First Edition, 1991, and Supplement 1, January 1992;
(45) API Standard 1104, Welding of Pipelines and Related Facilities, Seventeenth Edition, September 1988 and Errata, June 1989;
(46) API Standard 2000, Venting Atmospheric and Low Pressure Storage Tanks, Third Edition, Revised 1987;
(47) American Society of Mechanical Engineers (ASME), ASME SPPE 1-88, Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations, Addenda SPPE 1A-1988, Addenda SPPE 1B-1989, Addenda SPPE 1D-1990, Special Notice, October 1990;
(48) ASME Boiler and Pressure Vessel Code, Section VIII, "Pressure Vessels Division 1" (1989);
(49) ASME Boiler and Pressure Vessel Code, Section IX, "Qualification Standard for Welding and Brazing Procedures Welders, Brazers and Welding and Brazing Operators" (1989);
(50) American National Standards Institute/American Society of Mechanical Engineers (ANSI/ASME), ANSI/ASME Boiler and Pressure Vessel Code, Section I, Power Boilers including Appendices (1989);
(51) ANSI/ASME Boiler and Pressure Vessel Code, Section Heating Boilers including non-mandatory Appendices A, B, C, D, E, F, H, I, and J and the Guide to Manufacturers Data Report Forms (1989);
(52) ANSI/ASME Boiler and Pressure Vessel Code Section VIII, Pressure Vessel Divisions 1 and 2, including Nonmandatory Appendices (1989);
(53) ANSI B31.1, Pressure Piping Code, Power Piping, and Addenda B31.1a (1989);
(54) ANSI B31.3, Chemical Plant and Petroleum Refinery Piping (1990);
(55) ANSI B31.4, "Liquid Transportation Systems for Hydrocarbons, Liquid Petroleum Gas, Anhydrous Ammonia and Alcohols" (ASME) (1989);
(56) ANSI B36.10M, Welded and Seamless Wrought Steel Pipe (1985);
(57) American Concrete Institute (ACI), ACI Standard 201.2R- 77(82), Guide to Durable Concrete, Sixth Printing (1982);
(58) ACI Standard 222R-89, Corrosion of Metals in Concrete (1989);
(59) ACI Standard 224R-89, Control of Cracking in Concrete Structures (1989);
(60) ACI Standard 318-89/318R-89, Building Code Requirements for Reinforced Concrete and Commentary (1989);
(61) ACI Standard 350R-89, Environmental Engineering Concrete Structures ACI 515R.1R Guide to the Use of Waterproofing, Dampproofing, Protective and Decorative Barrier Systems for Concrete (1989);
(62) ACI Standard 357-R-84, Guide for the Design and Construction of Fixed Offshore Concrete Structures (1989);
(63) ACI Standard 357.1R-85, State-of-the Art Report on Offshore Concrete Structures for the Arctic (1985);
(64) ASTM Specification A333333M, "Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service" (1988), Revised A-88;
(65) ASTM Specification A381, "Standard Specification for Metal-Arc-Welded Steel Pipe for Use with High Pressure Transmission Systems" (1989);
(66) ASTM Specification A671, "Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures" (1989), Revision A, 1989;
(67) ASTM Specification A672, "Standard Specification for Electric-Fusion-Welded Steel Pipe for High Pressure Service at Moderate Temperatures" (1989), Revision B, 1989;
(68) ASTM Specification A69 1 Rev A, Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion Welded for High Pressure Service at High Temperatures (1989);
(69) Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), MSS SP-75, Specification for High-Test Wrought Welding Fittings (1988);
(70) MMS OCS Order No. 2, Drilling Operations, Section 5, Blowout-Preventer (BOP) Equipment Requirements (1988);
(71) National Association of Corrosion Engineers (NACE), NACE RP0175-75, Control of Internal Corrosion in Steel Pipelines and Piping Systems (1975);
(72) NACE RP 0275-75, Application of Organic Coatings to the External Surface of Steel Pipe for Underground Service ;
(73) NACE RP 0276-76, Extruded Asphalt Mastic Type Protective Coatings for Underground Pipelines (1976);
(74) NACE RP 0286-86, The Electrical Isolation of Cathodically Protected Pipelines (1986);
(75) NACE RP 06-75 Control of External Corrosion on Offshore Steel Pipelines (1988);
(76) NACE RP 01-69 Recommended Practice for Control of External Corrosion on Underground or Submerged Metallic Piping Systems, Revised 1983;
(77) NACE RP 02-85, Control of External Corrosion on Metallic Buried, Partially Buried or Submerged Liquid Storage Systems (1985);
(78) National Association of Pipe Coating Applicators (NAPCA), NAPCA 3-67-87, External Application Procedures of Hot Applied Coal Tar and Asphalt Enamel Coatings to Steel Pipe (Specifications and Plant Coating Guide, 1983);
(79) National Fire Protection Association (NFPA), NFPA 30-90, Flammable and Combustible Liquids Code (1990);
(80) NFPA 77-88, Recommended Practice on Static Electricity (1988);
(81) NFPA 78-89, Lightening Protection Code (1989);
(82) NFPA Chapter 6, Bulk Plants and Terminals (Flammable and Combustible Liquids Code Handbook, Third Edition, (1990));
(83) Petroleum Equipment Institute (PEI) RP-100-90, Recommended Practice for Installation of Underground Liquid Storage Systems (1990);
(84) Steel Structural Painting Council (SSPC), SSPC Chapter 16.1-82, Coatings for Pipelines and Other Underground Structures (Good Painting Practice), Volume 1, Second Edition, 1982;
(85) Steel Tank Institute, STI-P3 Specification System and Manual for External Corrosion Protection of Underground Steel Storage Tanks (1987);
(86) Underwriters Laboratories Standard 58, Steel Underground Tanks for Flammable and Combustible Liquids, Eighth Edition, August 3, 1990;
(87) Underwriters Laboratories Standard 174689, External Corrosion Protection Systems for Underground Storage Tanks, First Edition, November 7, 1990.
History: Eff. 5/14/92, Register 122
Authority: AS 46.03.020
Note to HTML Version:
The Alaska Administrative Code was automatically converted to HTML from a plain text format. Every effort has been made to ensure its accuracy, but neither Touch N' Go Systems nor the Law Offices of James B. Gottstein can be held responsible for any possible errors. This version of the Alaska Administrative Code is current through June, 2006.
If it is critical that the precise terms of the Alaska Administrative Code be known, it is recommended that more formal sources be consulted. Recent editions of the Alaska Administrative Journal may be obtained from the Alaska Lieutenant Governor's Office on the world wide web. If any errors are found, please e-mail Touch N' Go systems at E-mail. We hope you find this information useful. Copyright 2006. Touch N' Go Systems, Inc. All Rights Reserved.
Last modified 7/05/2006