Made available by Touch N' Go Systems, Inc., and the
Law Offices of James B. Gottstein.

You can also go to The Alaska Legal Resource Center or search the entire website search.

Touch N' Go,® the DeskTop In-and-Out Board makes your office run smoother. Visit Touch N' Go's Website to see how.
Title 5 . Fish and Game
Chapter 35 . Transportation, Possession and Release of Live Fish; Aquatic Farming
Section 51. Tanner crab gear marking requirements

5 AAC 35.051. Tanner crab gear marking requirements

At least one buoy on each Tanner crab pot or ring net must be legibly marked with the permanent ADF&G vessel license plate number of the Tanner crab vessel operating the gear. The buoy must bear only the number of the vessel used in operating the gear. The number shall be painted on the top one-third of the buoy in numerals at least four inches high and one-half inch wide, in a color contrasting to that of the buoy. The buoy markings must be visible on the buoy above the water surface when the buoy is attached to the crab pot.

History: Eff. 9/29/96, Register 139

Authority: AS 16.05.251

AS 16.05.632

Note to HTML Version:

The Alaska Administrative Code was automatically converted to HTML from a plain text format. Every effort has been made to ensure its accuracy, but neither Touch N' Go Systems nor the Law Offices of James B. Gottstein can be held responsible for any possible errors. This version of the Alaska Administrative Code is current through June, 2006.

If it is critical that the precise terms of the Alaska Administrative Code be known, it is recommended that more formal sources be consulted. Recent editions of the Alaska Administrative Journal may be obtained from the Alaska Lieutenant Governor's Office on the world wide web. If any errors are found, please e-mail Touch N' Go systems at E-mail. We hope you find this information useful. Copyright 2006. Touch N' Go Systems, Inc. All Rights Reserved.

Last modified 7/05/2006