Advertising with us can place you in front of thousands of visitors a day. Learn more!
- Alaska Statutes.
- Title 18. Health, Safety, and Housing
- Chapter 60. Safety
- Section 750. Labeling Required.
previous: Section 740
next: Section 755
. Safety Glazing Materials Required.
AS 18.60.750. Labeling Required.
- (a) Each lite of safety glazing material manufactured, distributed, imported, sold for use, or installed in hazardous
locations in the state shall be permanently labeled by etching, sandblasting, firing of ceramic material, hot-die
stamping, transparent pressure sensitive labels, or by other suitable means to ensure that the labeling will be
permanent. The label must identify the manufacturer, fabricator, seller, or installer, the thickness and type of safety
glazing material, and the fact that the material meets the test requirements of the American National Standards
Institute Standard (ANSI Standard) Z-97.1-1972.
- (b) The label must be visible and legible after installation, and the label may not be used on other than safety glazing
All content © 2008 by Touch
N' Go/Bright Solutions, Inc.
Note to HTML Version:
This version of the Alaska Statutes is current through December, 2007. The Alaska Statutes were automatically converted to HTML from a plain text format. Every effort has been made to ensure their accuracy, but this can not be guaranteed. If it is critical that the precise terms of the Alaska Statutes be known, it is recommended that more formal sources be consulted. For statutes adopted after the effective date of these statutes, see, Alaska State Legislature
If any errors are found, please e-mail Touch N' Go systems at E-mail. We
hope you find this information useful.